The production of Marine products such as Marine ball, Marine launching air bag, Marine inflatable fender and Marine inflatable ball has better protected our lives. Today we want to understand the problem of how to detect the Marine ball. In view of the characteristics and performance of the ship's ball, we should also realize that the detection of the ship's ball should also be paid attention to, and the detection of the ship's ball is also very important. It is necessary not only to test at the factory, but also to focus on the testing at the time of purchase, let us explain the experiments to be done when the ship leaves the factory by ball.

First of all, we need to understand the matters that need to be detected and paid attention to when the ship is tested by the ball. We need to check the dimensions. For the detection of Marine ball, we must complete it under the initial inflation pressure. For the ball length of the Marine ball, the diameter must be clearly detected. For the size of the first measurement itself, it is usually completed based on + % 10, -5%. Whatever it is, the scale itself is also good. For the diameter of the measurement and other aspects, we need to pay attention to it, but we need to measure multiple volumes when we measure and then average. There are many requirements for detecting air tightness, but we must be prepared for the measurements of the ball and its own. The general requirement is that no leakage occurs within 30 minutes.

Through the above understanding of how to detect ship berthing ball, we now probably have a relative understanding of ship berthing ball detection. I hope the above knowledge is helpful to you. If you need to buy Marine products, you can contact us at any time, or have specific understanding and business exchanges with our company, we look forward to your arrival.以上翻译结果来自有道神经网络翻译（YNMT）· 通用场景